Monday, February 28, 2011

PROJECT K-ON! Concert Stage Diorama (Part IX)

Here are the latest picture of the whole project which is 65% over-all completion status.
*I still don't have Figma YUI & ASUZA*

-Double Click on the Images to Enlarge-


- to be continued -

Sunday, February 27, 2011

PROJECT K-ON! Concert Stage Diorama (Part VIII)

WIP: Bass & Lead Guitar Amplifiers and Concert Stage Speaker Monitors.

Working on the guitar amplifiers, the concept is to attached a photo print of the amplifiers used in the K-ON! series.

Materials used:
1. High Grade Illustration Boards,
2. Used Cellphone Prepaid Cards,
3. Sewing Pins,
4. Medicine foil to be used as a handle of the amplifiers
5. Plastic Mesh
6. Photo print out of Marshall Amplifiers

-Double Click on the Images to Enlarge-


- Primed with Nyko Surfacer Primer Gray -

- Completed Guitar Amplifiers -


- to be continued -

PROJECT K-ON! Concert Stage Diorama (Part VII)

WIP: W-Box Speaker Enclosure, Base Stand Scaffolds, Mid/High Range Speakers

Materials Used:
1. High Grade Illustration Boards,
2. Used Cellphone Cards (for corner edges),
3. Plastic Mesh,
4. Sewing Pins


-Double Click on the Images to Enlarge-

- The Painted W-Box Enclosure & Base Stand -


- The Mid/High range Speaker Enclosure -

(drilling holes in order to cut the speaker slot)

 - making corner edges made from used cellphone cards -

- the finished project-






- to be continued -

PROJECT K-ON! Concert Stage Diorama (Part VI)

WIP: W-Box Speaker Enclosure, Base Stand Scaffolds

As in a live concert, a W-Box Speaker Enclosure is part of the sound system set-up.

Materials Used:
1. High Grade illustration board for this project.
2. Sewing Pins
3. Barbecue Sticks
-Double Click on the Images to Enlarge-
-measurement for the W-Box Speaker enclosure-

- drilling the holes for the speaker air ducts -

 - assembly on going -

- The Completed Project (Unpainted)-

The W-Box Base Scaffolds made of Barbecue Sticks

- to be continued-

PROJECT K-ON! Concert Stage Diorama (Part V)

WIP: Vertical Trusses/Scaffolds additional Base Platform.

I need to make an additional base platform for the scaffolds, needs additional elevation because i indeed miscalculated again the height/elevation. The figmas will only have only small space above their heads, if the trusses were not elevated. =(

-Double Click on the Images to Enlarge-
- using a High Grade illustration Board (measurement being done) -

- already cut the illustration boards -
 - using a glue gun to connect the edges-
- the finished box (base platform for the vertical trusses/scaffolds) -

- to be continued -